Updated On 01 Mar, 24

Why is ADT Doorbell Camera Blinking Red?

ADT Doorbell Camera is immensely capable of sending live footage and videos to the receiver output device making it popular in the vigilance equipment space. But your ADT Doorbell may become dysfunctional and start blinking red owing to a couple of reasons.

Here is a brief walkthrough that showcases two very common reasons as to why ADT Doorbell Camera blinks red. The first prime reason for this is actually the completely discharged battery that may have drained with consistent usage which can be overcome by recharging the battery through a stable power supply. The other cause for the ADT Doorbell camera blinking red is the unstable internet connection that may not be supplying adequate bandwidth going forward.

Home security is of utmost importance. You must double-check the home security hardware on daily basis in order to ensure that it is working properly.

Whenever you see a blinking red light on your ADT doorbell, then that means your doorbell's battery is low or the camera is gonna fail. In such a case, you need to recharge it immediately. Also, there is a chance that your ADT doorbell has lost internet connectivity.

Sometimes, the hardware starts to send out signals that sometimes go sideways. These hardware-related issues always remind you that there is a major problem that you must take care of as soon as possible.

Red light blinking on your ADT doorbell camera can mean a lot of things. This means that there is something wrong and you need to see it differently to make things right. Read below to understand in detail, why is my ADT doorbell flashing red.

Why does Your ADT Doorbell Camera Blink Red?

There are two reasons that could lead to the problem of the ADT doorbell camera blinking red.

  • This means that either the battery is going to fail and your system needs to be charged instantly.
  • The network connection is not stable enough to support the ADT system.

The internet issue is easier to fix in comparison to the battery issue. So, we are going to discuss that first.

Open the ADT Pulse application and check what is wrong with your Wi-Fi network. There is a chance that there is some problem with the router or there can be a signal issue as well. It is also possible that the signal has been taken down for some or other reason.

If there is a red ring light around your ADT doorbell, then there is a chance that there is some problem with your internet and you need to resolve that issue as quickly as possible.

when the connection is established, then the red light will be replaced by blue light and then everything will be back to normal.

How to Charge the Battery of My Doorbell Camera?

If you find that the red light of your ADT doorbell is blinking red and blue at a very fast pace, then it indicates that the battery is very low and it can die at any point and you need to recharge it as soon as possible.

There is a chance that one day or a few hours of battery life is remaining. This is when you connect your device to the charger. This process is a lot more complicated in comparison to jacking a power wire into the doorbell camera.

First of all, take off the faceplate of your doorbell. This will give you access to a recharging connection. Once you are done taking care of that, you should connect your mini USB cord to the power source, and then your battery will go up to 100%. The battery will get charged in the next 45 minutes.