How to Fix it when Schlage Keypad Lock Keeps Spinning?

Does your Schlage Keypad Lock not function and keep spinning? It would help if you used this guide. Now, let's start debugging! Schlage Keypad Lock Continues to Spin. All you have to do to unlock your Schlage Keypad lock when it keeps spinning is to replace the batteries.

If changing the batteries doesn't solve the problem, you can also attempt a factory reset on your Schlage lock.

Change Batteries of Schlage Keypad Lock

Because every Schlage lock uses a motor—which runs on batteries—to activate the deadbolt, it's critical to ensure the batteries are fully charged.

To replace the batteries in your Schlage lock, take the following actions:

Step 1: Find the battery cover on your Schlage safety and remove it first.

Step 2: Disconnect the battery holder or connector.

Step 3: Install the new battery and remove the old one.

Step 4: Reattach the battery connector to the replacement battery after installing the battery cover.

Step 5: Your Schlage lock will function again after you change the battery.

Try factory resetting your Schlage Keypad lock if it spins even after you swap out the batteries.

Schlage Keypad Lock Factory Reset

Your Schlage lock will return to its original factory setting after you factory reset it, wiping out all your customisations. When the lock is returned to its factory settings, you will require your lock programming code to reconfigure it. The user manual for your lock or the back of the safety contains the programming code.

Use these procedures to factory reset your Schlage lock:

Step 1: Disconnect the batteries in your lock first.

Step 2: Give the Schlage button on the lock five seconds of pressure and hold. This step must be completed four to five times.

Step 3: Finally, while reconnecting the batteries, press and hold the Schlage button. Release the Schlage button after the batteries are inserted.

Now, use the default programming code to reconfigure your lock once more.

Conclusion

Try these fixes if your Schlage Keypad lock is not unlocking and is spinning endlessly:

• Replace the lock's batteries.
• Reset your lock from the factory.