How to Fix Xbox One Controller Not Working?

Here’s your step by step troubleshooting instruction to fix Xbox One Controller Not Working, in case your controller won’t connect or pair up with your Xbox one.

1. In Case Your Xbox One Controller isn’t Connecting

Do you have eight controllers already connected to your console? While you likely don’t use this many often, the maximum amount of controllers an Xbox One supports is eight.

• You cannot and should not connect the 9th controller. 
• Hold down the Xbox button on a controller and click on turn controller off on the listed menu. Now you can try connecting the new controller again. 
• Make sure you can only pair a controller with one Xbox One system at a time.

2. In Case Your Xbox One Controller Keeps Disconnecting

What if your Xbox controller pairs then again keeps disconnecting? This could ruin an excellent multiplayer diversion session and is very frustrating to modify.

Do bear in mind that it’s a traditional battery-saving feature of the Xbox One controller to disconnect if you don’t use it for quarter-hour. This isn’t a drag once enjoying games, however will acquire play if you primarily use your Xbox One as a media center.

You will got to move a stick or press a button each therefore usually, otherwise you’ll got to reconnect it later by pressing the Xbox button.

However, if you’re facing an issue with disconnecting, it most likely happens far more oftentimes every minute. If that’s the case, you will be able to attempt some troubleshooting steps.

It’s necessary to verify that your batteries square measure charged once you have this issue. Faucet the Xbox button to travel back to the house menu, and then rummage around for the battery icon within the top-right corner. If they’re low, replace or charge them as necessary.

Frequent disconnects may also have their root in interference. The Xbox One controller features a vary of regarding 19-28 feet, in step with Xbox Support. Attempt moving nearer to your console.

You should conjointly take away obstructions between the controller and console, like laptops, metal shelving, and similar. If your Xbox is within associate wall unit, attempt moving it outside the unit to induce a stronger affiliation.

3. In Case Your Xbox One Controller is Blinking

If your Xbox controller blinks or flashes, once you press it; then it signifies that your controller isn’t paired to a console. Try using a micro-USB cable to try it, If your controller won’t pair using the button. 

Merely plug the cable into a USB port on your console and connect the opposite finish to your controller, then hold the Xbox button on your controller for a number of seconds.

If this fails to unravel the matter, you ought to restart your console. Press and hold the facility button on the front of your system for ten seconds to totally power it off. Then press it once more to show it back on.

4. In Case Your Xbox One Controller won’t Turn On

Make sure that the batteries aren’t dead, in case your Xbox controller doesn’t turn on. Your Xbox won’t power on if the batteries are low or dead and this is the most common reason among them all. The next thing you have to do is to replace the two AA batteries, by opening the back cover of your controller.

Now if your  Xbox One Controller Not Working even after you changed the batteries then here are some more ways to try:

• Press and hold the power button on the front side of the system for  seconds, to turn the Xbox one off.
• Disconnect the console’s power cable for a while.
• Use a micro-USB cable you know is good (try others if the first doesn’t work) to connect your controller to the system.
• Now plug your Xbox one back in and then turn it on by pressing the power button on the system. Make sure you don’t press anything on the controller until it boots up fully.
• Once the system is rebooted, try pressing something on your controller and see if the issue is resolved or the Xbox One Controller Not Working.

General Steps to Connect Your Xbox One Controller if Your Xbox One Controller Not Working

Update the Controller Firmware

• Your Xbox controller firmware gets updates at times. While it doesn’t get these often, corrupted or outdated firmware could cause disconnection issues.
• In case you have a functional controller, update it by tapping the Xbox button for the guide to open. 
• Now go to the System > Settings > Devices & streaming > Accessories. Click on your controller, then select Device info > Firmware version to check for latest updates.

Remove Connected Xbox Accessories

Other connected accessories to the controller or console might also be the reason for the connection issues. If you have an external hard drive, keyboard, or similar peripheral connected to your Xbox, try disconnecting it and attempt to connect your controller again. Do the same for the Stereo Headset Adapter on your controller if you have it.

In case you want to sync your controller using a micro-USB cable, remember to use a high quality cable in order for it to work effectively.

Try Connecting Another Controller

Just like troubleshooting, you can also try connecting different devices (in this case controller) to your Xbox system. Lastly, check it the problem still persists, if the issue is resolved then the issue was with your original controller.

Reboot Your Xbox One

At times, a reboot is the best option in the case of Xbox controller issues. Remember to reboot your console when troubleshooting controller issues. By default, simply tapping the power button on the front of the system only puts it into sleep mode, so make sure you hold it for at least 10 seconds for a full shutdown. 

Try Using a USB Cable Permanently

In case the connection issues clear up when using a USB cable, your best bet might be to use your controller as a wired device to prevent future issues.

We hope the above article helped you to fix your Xbox One Controller Not Working.