Do you find that your DirecTV remote is not working? If yes, then that means your system is new and you are required to program your remote. In case you find reading an instruction manual long and tiring, then worry not as you can learn how to program your DirecTV remotes.
Before you move on with the solutions to fix the DirecTV remote not working problem, you need to first determine the model of your remote. Generally, there are two kinds of DirecTV remotes. The first one is the Genie remote and the other one is the Universal remote. In case you aren't sure what you have, then you must compare the remote with the images on the internet.
A universal remote is capable of controlling 4 devices, which include DVD players, game consoles, and TV. You can see a mode switch on top of your remote. It helps you know the device it is controlling. If you want, you can change the designated device of your remote by moving the switch to the desired setting.
Below are the steps that you are required to follow to program your DIRECTV remote.
Step 1: On your remote control, you need to press the menu button.
Step 2: Now, some instructions will appear on your screen. There, you need to select Settings& Help. After that, you need to go to Settings, Remote Control, and then Program Remote.
Step 3: After that, you need to select the device that you wish to program. In case you don't see a device or TV listed, then you must search for a DIRECTV code lookup tool to search for a 5-digit code for your device.
Step 4: Then, carry out the instructions appearing on your screen to complete the programming on your remote.
Below are the steps that you are required to follow in order to program DIRECTV Universal remote for a standard DVR or SD receiver.
Step 1: On your remote, press the MENU button.
Step 2: Choose Parental Favs and Setup and then select System Setup.
Step 3: Select the device that you want to program. In case you don't see a device or TV listed, then you can use the code lookup tool to search for a 5-digit code.
Step 4: Now, complete the programming by performing the instructions mentioned.
Below we have stated the steps that you are required to follow to complete the automatic process for your Genie remote. In case this solution does not help you with your problem, then you can try out the manual programming steps.
Step 1: Point your remote toward your Genie device. Then, press the Mute button and Enter button until you see a green light blinking at the upper part of your remote. The TV screen is going to show Applying IR/RF setup when it is ready for programming.
Step 2: Turn on the device that you want your remote to control.
Step 3: After that, press the Menu button.
Step 4: Choose Settings and Help, Settings, Remote Control, and Program Remote.
Step 5: Select the name of the device that you want to control.
Step 6: Follow the directions on the screen to complete the programming.
Step 1: Point your remote at the Genie device and then press and hold the Mute button.
Step 2: Now, enter the code 961 on your Genie remote.
Step 3: After that, you are required to press the channel up button.
Step 4: Then, press the enter key.
Step 5: Press OK when the TV screen shows Your Remote is now setup for RF.
Step 6: Turn on the device that you wish to control using your remote.
Step 7: Now, press the MENU button on your remote.
Step 8: Then, carry out on-screen directions to complete programming.
Copyright © 2024 smartdeviceshelp | All Right Reserved.