Updated On 01 Apr, 24

How to Charge Ring Spotlight Camera Battery?

The ring spotlight camera comes with spotlights and it can easily be mounted at any place you want where you think you require extra security. The camera is available in four different configurations.

  • Spotlight Cam Wired
  • Spotlight Cam Battery.
  • Spotlight Cam Solar
  • Spotlight Cam Mount

We are all in love with the ring spotlight cameras. It has always stood out among the other options like Nest, Canary Flex, etc. in terms of quality and battery as well.

The battery of this device usually lasts up to 2 months with charges and normal usage. The battery does depend on environmental factors like the weather and also on the number of activities taken by the camera.

One battery is more than enough for the camera to work properly. But if you do not want to turn it off while you are charging or if you wish to extend the battery life you can always buy a new battery.

Equipment to Charge Ring Spotlight Camera-

The ring spotlight camera battery is very easy to charge. It only needs a common micro-USB cable. Thankfully, the camera does come with an orange USB cable. You can easily plug it in any USB port.

It can be changed easily through the USB port of your computer or laptop. Generally, it takes about five to ten hours to fully charge. The span can differ based on how you are charging it. It will be faster if plugged to a socket on the wall than if plugged into the USB port on your computer.

Steps to Charge Ring Spotlight Camera Battery-

As mentioned above, the camera battery is very easy to charge. These simple steps will guide you to charge ring spotlight camera battery.

Step 1: Press the white button on the device and lift it open to open the battery compartment.

Step 2: Long press the release tab to remove the battery

Step 3: Connect a USB charger to the charging port in the battery. Both red and green light will glow when the battery is charging.

Only the green light will glow when the battery is completely charged.

Step 4: Put the battery back in the compartment. You’ll know it’s in the place when you hear a click.

Step 5: Close the compartment. It will require a little push. Again the click will tell you when it’s closed properly.

Step 6: The ring spotlight camera will turn on in a minute and will be ready to use again.

There you go. You can use your device again securely for another two months without any problem.