How to Fix Arlo Error Code 4404?

As described in this post, update the cameras and the base station to fix the problem. A firmware issue typically causes the Arlo error code 4404. The device will assist you in resolving the Arlo error code 4404 error since, as you may know, Arlo cameras function with a base station that handles the software update.

How to Resolve the 4404 Arlo Error

Let me give you some steps you can take to have the mistake rectified. 

If it doesn't work, try forcing the base station to power cycle; this should update the camera's firmware. Alternatively, you can start by forcing the cameras to power cycle.

The procedure to correct the error is listed below.

Power Cycle the Cameras

• Remove the camera's battery, wait 30 seconds, then replace it;
• As soon as the camera firmware upgrade begins, see if the error has been addressed.

When a new firmware version becomes available, the update process begins automatically. When the cameras are connected to the base station, an LED that blinks and changes between blue and amber should be visible.

Restarting the Arlos Base Station's Power

• Remove the base station's power plug, wait about two minutes, and then plug it back in.
• Once more, allow two minutes to pass before checking to see if the LED is solid green.

The base station should connect to the Internet and sync with the cameras after the power cycle. The new firmware upgrade should occur automatically between 3 and 5 AM, per the Arlo user manual.

This Usually Suffices to Resolve the 4404 Problem

Ensure that all the cameras and the base station have a steady Internet connection and that the power supply is not interrupted while the firmware is updated.

Additionally, you need to upgrade the Arlo smartphone app to the most recent version and test the cameras for a while to see if the issue has been resolved.

Conclusion

The majority of the time, a firmware update can resolve the Arlo problem code 4404. Arlo cameras are technological equipment. Therefore, it's expected that their firmware could experience issues. Make sure the cameras are running the most recent firmware.