How to Install Ring Spotlight Camera Solar Panel?

Have you just bought the Ring Spotlight Cam? And you want to install Ring Spotlight Camera Solar Panel but don’t know how to install it. Then don’t worry about that here I am going to provide for you the simplest and easiest steps to follow. 

If you like the simplicity and convenience of this unnoticeable camera. Although, you might frequently think as long as it’s still charged. Sometimes convenient, the wireless camera needs to be continuously charged to keep an eye on your home.

Under the Ring Solar Panel, you can enjoy peace of mind knowing that your camera always has a full battery. So, It’s all about this solar panel?

To install and connect your Spotlight Cam Solar Panel to your Spotlight Cam Battery is a simple process, simply follow the guidance.

Note: You have to complete the setup of your Spotlight Cam Battery in your Ring App first of all install Ring Spotlight Camera Solar Panel.

Here are the Steps to Install Ring Spotlight Camera Solar Panel. Follow the Step by Step:

Step 1 : Select Your Install Location

Once selecting your installation spot, make sure to select a spot that gets reliable Sun exposure every day. Spotlight Camera Solar Panel can maintain your Spotlight Cam Battery charged with just a few hours of direct sunlight per day.

Step 2 : Line up Your Spotlight Cam Solar Panel

To correctly align your Spotlight Cam Solar Panel:

Take the help of the Solar Panel mounting arm like a pattern, note the screw holes on your chosen surface with a pencil.

Step 3: Drill Holes

Alternative: With the help of a drill to drill holes where you marked the position of the mounting holes.

• If you install Ring Spotlight Camera Solar Panel on brick, concrete, or stucco, place the included plastic anchors into the holes. You will need to use a hammer to take the anchors in.
• If you set up the bracket on wood or vinyl, just use the included screws.

Step 4 : Put up the Mounting Arm

Ensure the mounting arm to the wall with the added screws. Tighten until secure.

Step 5 : Put up the Solar Panel

Slide the solar panel onto the mounting arm. Make sure it's seated securely.

Note: If you want to adjust the angle of the solar panel for better Sun coverage, loosen the adjustment screw on the mounting arm, fix your desired angle, then re-tighten the screw.

Step 6 : Pop Out the Weatherproofing Plug

You will have to remove the mounting plate on your spotlight cam, come out the weatherproofing plug and then replace it.

• Push the button on the bottom to open the battery section.
• Push the button on the back of the Spotlight Cam, and slide the mounting plate out of its slot.
• On the mounting plate, explode the rubber waterproofing plug out of its hole.
• Move the mounting plate back into its slot on the back of the Spotlight Cam until it clicks into place.

Step 7 : Connect the Solar Panel Charging Cable into the Spotlight Cam

• Track the charging cable from your Solar Panel into the power connector on Spotlight Cam.
• Remove the center plug.
• Connect the snap ring barrel charging cable into the power connector on Spotlight Cam.

Step 8 : Mount the Spotlight Cam

Enter Spotlight Cam into its mounting bracket, set the desired angle, then tighten its adjustment screw.

Note: Confirm that to charge and insert the included battery into your Spotlight Cam. Spotlight Cam Solar Panel stays your battery charged but does not replace it. 

To Sum it Up-

As I mentioned above the steps on how to install Ring Spotlight Camera Solar Panel. So, I hope now you will be able to do it. If you find it is helpful for them please share it with other people also. So, they can also take help from this. Thank you for reading this post.